Trenching & TunnelingDelivering Professional Solutions with Greater Speed & Precision

Trenchless Excavation Through Jack & Bore Tunneling

Jack and bore tunneling is an auger boring method for trenchless excavation under various crossings such as railways and highway corridors where there is a strict requirement to not interrupt the flow of traffic. This method uses Fiberglass Reinforced Pipes (FRE) pipes for housing cables, which are installed inside a one-metre diameter steel casing and then encased by injecting grout to fill the casing and thus stabilize the ground. Depending on soil conditions, this jack and bore tunnel can reach a distance of 150 metres. 

We utilize a modified auger bore to excavate the tunnel, which uses various cutting heads capable of breaking hard shale. Dewatering of the launching and the receiving shaft is done in-house using a network of pumps and hoses connected to tanks. A slide rail shoring system is used for the shafts and provides safe conditions for crews working inside the shaft. The modified auger bore provides stability in poor soil conditions such as sandy and silty soil with high water content, minimizing ground loss. Steel casings are welded together through our in-house welding crew.

Non-Interruptive Road Crossing Installations & Expert Dewatering

We bring deep expertise in the construction of non-interruptive road crossing installations for locations busy with traffic flow using an innovative technique called cap and lag tunneling. Cap and lag tunneling minimizes the impact on the flow of traffic by going below grade, leveraging manual hand excavation of soil within a 1.2 x 1.2-meter engineered timber structure supporting the excavation. 

We also have vast experience and capacity for dewatering groundwater using conventional and non-conventional methods such as isolated pump, pump system with hoses connected to sedimentation tanks, and hydro vacuum removal of water and disposal to the receiving facility.

Stay on Schedule with Full Service, On-Site Concrete Services

We own and operate an on-site, ready-mix concrete plant that supplies concrete and other ready-mix materials to all our construction crews, assuring our expert teams mitigate or eliminate delays while maintaining compliance with client schedules. Our highly trained teams are also capable of installing pour-in-place or pre-cast concrete foundations, including all the forming and rebars required for installation, along with concrete finishing.

Comprehensive Below-Grade Construction

We have the workforce, expertise, equipment, and administrative support to excavate trenches in various soil conditions, including but not limited to clay, sandy, hardpack, etc. We utilize the best shoring equipment to protect the workers and ensure a quality installation. 

Our experienced teams are well-trained in the installation of municipal water and sewage infrastructure in locations ranging from individual lines to complete road reconstructions, as well as the installation of landfill gas collection systems in both urban and residential settings. This includes extraction wells, underground collection pipes, fabrication, and commissioning of gas treatment facilities. 

We also have the capacity and expertise to construct or rebuild manholes and underground vaults for housing various electrical equipment. These are structural assets that are built underground in various areas, congested with existing utilities, and require deep knowledge of construction and engineering principles that our professional teams bring to every project for our clients.